Hobbywing LCD Program Box Pro hw30502002

The Program Card LCD Programming Box Pro, with its large 2.8'' LCD screen, offers the convenience of programming brushless ESCs quickly and easily, whether you're traveling or at home on your computer.

With a USB-C adapter, you can also connect the box to a computer, for example to update the firmware. Another feature is that the LCD programming box can measure the voltage of individual lithium cells or entire packs, so three excellent functions in one compact device.

Note - refer to the programming settings of your controller to find out what values ​​can be set. Do not power the programming box unless the controller instructions require the programming box to be powered by an external power supply.

Features

Vivid display with 2.8'' diagonal screen (about 7 cm)

Backlight adjustment with 20 levels available

Easy operation with control wheel

Save and export controller settings

Built-in battery tester for 1-8S batteries

Built-in Bluetooth signal

Compatible with HW Link V2 app (iOS and Android)

Technical specifications

DC input voltage: 5-12.6V*

Ports: - USB type C

- Regulator

- Power supply

Display: 2.8'' LCD

LiPo measurement: 2-8S LiPo / LiIon / LiFe

Measurement accuracy: +/- 0.1V

Dimensions: 105.6x59. 24.4 mm

Weight: 85 g

*If the ESC does not have a built-in/external BEC, it is A separate battery is required to power this programming box.

Supported ESCs

XERUN Car ESC: Version 2.0 and above

EZRUN Car ESC: Version 2.0 and above

PLATINUM Air ESC

Seaking Pro Boat ESC

Selected QUICRUN Car ESC

Hobbywing LCD Program Box Pro, this peripheral can be used in multiple ways:

As an independent parameter adjustment device, directly using the built-in LCD screen to display, set and share ESC parameters (import).

Connect the ESC to a computer using a USB adapter. Use the USB Link application software on the computer to update the ESC firmware and set parameters.

Bluetooth OTA Module: Using the mobile APP to set ESC parameters, update the firmware and read the data.

Detect the overall voltage of the lithium battery and the individual voltage of each cell.

The scope of application can also be understood for all the ESCs that the old G2 LCD program box and Bluetooth OTA module can support.

Specifications

Dimensions: 105.6x59x24.4mm（LxWxH）

Weight: 85g

Power supply voltage: 5-12.6V (A separate battery is required for power supply when this program card is connected to an ESC without built-in BEC)

Interface: USB TYPE-C, ESC interface (Futaba plug),

Power interface (Futaba plug)

Display: LCD screen

Invia commenti

Riquadri laterali

Cronologia

Salvate